background image

ENG - 19

I can’t connect a slave to Group play.

 

;

After 1 hour, the host will block any 
additional slaves from being added.  
Press the 

GROUP PLAY

 button on host, 

after it display “

HOST

” message, the slave 

can be reconnected.

It cannot make a “Wireless/Wired Group/Add 
Stereo/Bluetooth” connection.
Is the distance between systems too far?

 

;

It is recommended to make a “Wireless/ 
Wired Group/Add Stereo/Bluetooth” pairing 
within 3.3 ft (1 meter) from the system.

 

;

The recommended operating distance 
between Party Audio systems is closer than 

32.8 ft (10 meters).

08  LICENSE

The Bluetooth® word mark and logos are 

registered trademarks owned by the Bluetooth 

SIG, Inc. and any use of such marks by Samsung 

Electronics Co., Ltd. is under license. Other 

trademarks and trade names are those of their 

respective owners.

Qualcomm aptX is a product of Qualcomm 

Technologies, Inc. and/or its subsidiaries. 

Qualcomm is a trademark of Qualcomm 

Incorporated, registered in the United States and 

other countries. aptX is a trademark of Qualcomm 

Technologies International, Ltd., registered in the 

United States and other countries.

09  OPEN SOURCE 

LICENSE NOTICE

To send inquiries and requests regarding open 
sources, contact Samsung via Email  
([email protected]).

10  IMPORTANT 

NOTES ABOUT 

SERVICE

 

Figures and illustrations in this User Manual 
are provided for reference only and may differ 
from actual product appearance.

 

An administration fee may be charged if either:  
a. An engineer is called out to your home at 
your request and there is no defect in the 
product.  
b. You bring the unit to a repair center and 
there is no defect in the product. 

 

You will be advised of the amount of the 
administration fee before any work is done or 
a home visit is made. 

 

If you have a problem with this product, we 
strongly recommend you read the 
appropriate section of this manual, visit the 
Support page for your product at  
www.samsung.com, or call Samsung Product 

Support (1-800-726-7864) to find an answer 

before you contact a service center for a 
repair.

Summary of Contents for MX-T40





























Reviews: