16
Wired Remote Controller Installation
English
16
Installation
Wired Remote Controller Error Codes
Display
Description
Communication error between wired remote controller and indoor/ERV units after successful
communication.
No communication between Master(Main) and Slave(Sub) wired remote controllers.
No communication between wired remote controller and indoor/ERV units
Wired remote controller is connected on F1/F2 channel.
Two or more wired remote controllers is set as Master(Main).
No ERV unit installed for interlocking function.
No indoor unit installed for interlocking function.
Over 16 indoor/ERV indoor units installed.
Indoor units of different temperature setting(°C/°F) connected to same wired remote controller.
Wired remote controller(s) has different temperature unit setting with indoor unit(s).
Slave(Sub) wired remote controller has different option setting with Master (Main).
Two or more wired remote controllers set as Slave(Sub).
No By-Pass function on ERV unit but wired remote controller is set to use By-Pass.
No Auto function on ERV unit but wired remote controller is set to use Auto.
Temperature sensor Open/Short error.
- Memory error.
- No damper feedback.
NOTE
• For the error codes for your indoor/outdoor units and ventilator(ERV), refer to the installation manual of each device.
Summary of Contents for MWR-WE13
Page 23: ...23 English 23 Service Mode MEMO ...
Page 24: ......
