manualshive.com logo in svg

Samsung Multifunction Xpress M207 Series, User Manual

Share
Download
Samsung Multifunction Xpress M207 Series User Manual Download Page 67

67

3. Maintenance

Available supplies

When supplies reach the end of their life spans, you can order the followings of supplies for your machine:

 

Depending on the options, percentage of image area and job mode used, the toner cartridge’s lifespan may differ.

 

 

When purchasing new toner cartridges or other supplies, these must be purchased in the same country as the machine you are using. Otherwise, new toner 
cartridges or other supplies will be incompatible with your machine due to different configurations of toner cartridges and other supplies according to the specific 
country conditions.

 

 

Samsung does not recommend using non-genuine Samsung toner cartridge such as refilled or remanufactured toner. Samsung cannot guarantee non-genuine 
Samsung toner cartridge's quality. Service or repair required as a result of using non-genuine Samsung toner cartridges will not be covered under the machine’s 
warranty.

 

Type

Average yield

a

a. Declared yield value in accordance with ISO/IEC 19752. The number of pages may be affected by operating environment, printing interval, graphics, media type and media size.

Part name

Toner cartridge

Approx. 1,000 pages

MLT-D111S

Summary of Contents for Multifunction Xpress M207 Series




























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands