Samsung Multifunction ProXpress C267 Series User Manual Download Page 27

Page: 27 / 349

1. Introduction

Installing the driver locally

A locally connected machine is a machine directly attached to your computer

using the cable. If your machine is attached to a network, skip the following

steps below and go on to installing a network connected machine’s driver (see

"Installing driver over the network" on page 160).

•

If you are a Mac

Linux or UNIX operating systems user, refer to the

"Installation for Mac" on page 151

"Installation for Linux" on page 153

"Installing the UNIX printer driver package" on page 166.

•

The installation window in this

User’s Guide

may differ depending on the

machine and interface in use.

•

Only use a USB cable no longer than 3 meters (118 inches).

Windows

Make sure that the machine is connected to your computer and
powered on.

Insert the supplied software CD into your CD-ROM drive.

If the installation window does not appear, click

Start

All programs

Accessories

Run

X:\

Setup.exe

replacing “X” with the letter, which represents your CD-

ROM drive and click

•

For Windows 8,

If the installation window does not appear, from

Charms

, select

Search

Apps

and search for

Run

. Type in X:\Setup.exe, replacing

“X” with the letter that represents your CD-ROM drive and click

If “

Tap to choose what happens with this disc.

” pop-up window

appears, click the window and select

Run Setup.exe

Review and accept the installation agreements in the installation
window. Then, click

Next

Summary of Contents for Multifunction ProXpress C267 Series






























































































































































































































































































































































Search results

Summary of Contents for Multifunction ProXpress C267 Series

Reviews:

Related manuals for Multifunction ProXpress C267 Series

Brands by name

Popular brands

Samsung Multifunction ProXpress C267 Series, User Manual

Search results

Summary of Contents for Multifunction ProXpress C267 Series

Reviews:

Related manuals for Multifunction ProXpress C267 Series

Brands by name

Popular brands