Samsung Multifunction MultiXpress K325 Series User Manual Download

Page: 263 / 432

263

13. Useful Tools

SyncThru™ Web Service

This chapter gives you step-by-step instructions for setting up the network

environment through SyncThru™ Web Service.

•

Internet Explorer® 8.0 or higher is the minimum requirement for

SyncThru™ Web Service

•

Some menus may not appear on the display screen depending on the
settings or models. If so, it is not applicable to your machine.

What is SyncThru™ Web Service?

If you have connected your machine to a network and set up TCP/IP network

parameters correctly, you can manage the machine via SyncThru™ Web Service.

Use SyncThru™ Web Service to:

•

View the machine’s device information and check its current status.

•

Change TCP/IP parameters and set up other network parameters.

•

Change the printer preference.

•

Set the email notifications advising of the machine’s status.

•

Get support for using the machine.

•

Upgrade machine software.

Required web browser

You need one of the following web browsers to use SyncThru™ Web Service.

•

Internet Explorer® 8.0 or higher

•

Chrome 27.0 or higher

•

FireFox 21.0 or higher

•

Safari 5.9.1 or higher

Connecting to SyncThru™ Web Service

IPv4 supported web browser

Start a web browser, such as Internet Explorer®, that supports IPv4
addressing as a URL.

Enter the machine’s IP address (http://xxx.xxx.xxx.xxx) in the address
field and press the Enter key or click

You can get the machine’s IP address from the machine report (see"Other
settings" on page 243).

Your machine’s SyncThru™ Web Service website opens.

Summary of Contents for Multifunction MultiXpress K325 Series

















































































































































































































































































































































































































































Search results

Summary of Contents for Multifunction MultiXpress K325 Series

Reviews:

Related manuals for Multifunction MultiXpress K325 Series

Brands by name

Popular brands

Samsung Multifunction MultiXpress K325 Series, User Manual

Search results

Summary of Contents for Multifunction MultiXpress K325 Series

Reviews:

Related manuals for Multifunction MultiXpress K325 Series

Brands by name

Popular brands