15
ENGLISH
Initializing user data
f
f
If you want to initialize all the user data to set the Wi-Fi kit as factory default status, press and hold the button (SW3)
inside the Wi-Fi kit for 5 seconds. After releasing the button, all the lamps on the Wi-Fi kit are turned on and all the user
data is deleted.
Updating the Wi-Fi kit by SD card
Ⓓ
Ⓒ
Type
Capacity
SD
128MB ~ 2GB
SDHC
4GB ~ 32GB
Micro SDHC
4GB ~ 8GB
1. Make update directory in the SD card. Copy the latest S/W image and paste it into the update directory of the SD card.
2. Insert the SD card into the SD card slot which is located inside the Wi-Fi kit.
Ⓒ
3. Press the
Reset
button on the side of the Wi-Fi kit.
4. The lamp inside the Wi-Fi kit is turned on during the update.
Ⓓ
f
f
When the update is completed correctly, the lamp is turned off.
f
f
When the update is completed incorrectly, the lamp blinks.
5. When the update fails, the Wi-Fi kit returns to the previous version when it restarts. Retry the update but if it still does not
work, take following measures.
f
f
Check the file for an error: change the update image (file)
f
f
Check the SD file for an error: change the SD card
f
f
Check the PBA for an error: change the PBA.
MULTI WIFI-APP-EU_IBIM_EN.indb 15
2017-05-30 오전 10:59:54
