![background image](http://html2.mh-extra.com/html/samsung/messager-ii-sch-r560-series/messager-ii-sch-r560-series_user-manual_5224396044.webp)
41
Note:
The
Lookup
command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
To look up information for a specific contact:
1.
In standby mode, press and hold
to launch
Voice
SVC
.
“
Say a Command
” appears in the display and is
pronounced through the speaker.
2.
Say “
Lookup
”.
Voice SVC prompts you to “
Say the name.
”
3.
Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “
Did you say?
” followed by the first name on the list.
4.
Say “
Yes
” to confirm the name or “
No
” to hear the next
name, or use the keypad to select the correct name from
the list. (See
“Choice Lists”
on page 72, for more
information.)
•
To say the name again, press the
Repeat
soft key.
•
To exit VoiceSignal without dialing, press
.
5.
The contact information for the name you selected appears
in the display.
•
To dial the number associated with the name, press
.
•
To erase this entry from your Contacts list, press the
Erase
soft key.
•
To add or change information for this entry, press
EDIT
(
).
•
For more options, press the
Options
soft key and the following
options pop-up in the display:
–
Send Txt Msg
–
Send Pic Msg
–
Send Video Msg
–
Call
–
Send Name Card Via Bluetooth
Quick Search Method
With
Quick Search
set to
On
, you can quickly access a Contact by
doing the following:
Note:
For more information, refer to
“Quick Search”
on page 125.
1.
In standby mode, press the first few numeric keys that
correspond to the letters of the contact’s name.