15
Step-by-step installation guide
B. ATTACH THE MOUNTING
PLATE TO THE WALL
Attach the plate to the wall using toggle bolts.
At least one wood screw must be used to attach the
plate to a wall stud.
1
. Remove the toggle wings from the bolts.
2
. Insert the bolts into the mounting plate through
the holes designated to go into drywall and
reattach the toggle wings to ¾˝ onto each bolt.
INSTALLATION OVERVIEW
A
. Prepare Rear Wall (only horizontal duct)
B
. Attach Mounting Plate to Wall
C
. Prepare Top Cabinet
D
. Mount the Microwave Oven
E
. Connecting Ductwork (only vertical duct)
A. PREPARING THE REAR
WALL FOR OUTSIDE BACK
EXHAUST
You need to cut an opening in the rear wall for
outside exhaust.
CL
• Read the instructions on the REAR WALL
TEMPLATE.
• Tape it to the rear wall.
• Cut the opening, following the instructions of the
REAR WALL TEMPLATE.
CAUTION
:
Do not cut an opening on the real wall, in
case of vertical duct and non-vented ductless.
3. INSTALLATION
SMH8165_XAA_DE68-03587A-10_EN.indd 15
6/19/2019 3:44:40 PM
