![background image](http://html.mh-extra.com/html/samsung/m8800c/m8800c_user-manual_1193103008.webp)
2
H
ealth
and
safet
y in
format
ion
The exposure limit set by the FCC for wireless
mobile phones employs a unit of
measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure
of the rate of absorption of RF energy by the
human body expressed in units of watts per
kilogram (W/kg). The FCC requires wireless
phones to comply with a safety limit of 1.6
watts per kilogram (1.6 W/kg). The FCC
exposure limit incorporates a substantial
margin of safety to give additional protection to
the public and to account for any variations in
measurements.
SAR tests are conducted using standard
operating positions accepted by the FCC with
the phone transmitting at its highest certified
power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of
the phone while operating can be well below
the maximum value. This is because the
phone is designed to operate at multiple
power levels so as to use only the power
required to reach the network. In general, the
closer you are to a wireless base station
antenna, the lower the power output.
Before a new model phone is available for sale
to the public, it must be tested and certified to
the FCC that it does not exceed the exposure
limit established by the FCC. Tests for each
model phone are performed in positions and
locations (e.g. at the ear and worn on the
body) as required by the FCC.
For body worn operation, this model phone
has been tested and meets the FCC RF
exposure guidelines when used with an
accessory that contains no metal and that
positions the handset a minimum of 1.5 cm
from the body.
Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.