background image

39

FreeSync

FreeSync

 technology is solution that eliminates screen tearing without all the usual lag and latency.

This feature will eliminate screen tearing and lag during game play. Improve your gaming experience.
The displayed 

FreeSync

 menu items on the monitor may vary, depending on the monitor model and 

compatibility with the AMD graphics card.

 

Off

: Disable 

FreeSync

.

 

On

: Turn on the AMD graphics cards' 

FreeSync

 function. You may experience intermittent flickers 

when playing some games.

Apply the optimum resolution when using 

FreeSync

.

The refresh rate setting method please refer to 

Q & A

 → 

How can I change the frequency?

 

The 

FreeSync

 function is only enabled in 

HDMI

 or 

DisplayPort

 mode.

Use the HDMI/DP cable provided by the manufacturer when using 

FreeSync

.

 

If the 

DisplayPort Ver.

 is set to 

1.1

, the 

FreeSync

 mode is disabled.

 

This menu is not available when 

PIP/PBP Mode

 is enabled.

If you use the 

FreeSync

 function while playing a game, the following symptoms may occur:

 

The screen may flicker depending on the type of graphics card, the game option settings, or the 
video being played. Try the following actions: decrease the game setting values, change the 
current 

FreeSync

 mode to 

Off

, or visit the AMD website to check your graphics driver’s version and 

update it with the latest one.

 

While you are using the 

FreeSync

 function, the screen may flicker due to variation of the output 

frequency from the graphics card.

 

The response rate during the game may fluctuate depending on the resolution. A higher resolution 
generally decreases the response rate.

 

The sound quality of the monitor may be degraded.

 

If you encounter any issues when using the function, contact the Samsung Service Center.

 

If you change the screen resolution while the function is 

On

, the screen may intermittently blank out due 

to the graphic card. Set 

FreeSync

 to 

Off

 and change the resolution.

 

The function is unavailable in the devices (e.g. AV devices) that have no AMD graphic card. If the function is 
applied, the screen may have malfunction.

The models in the Graphics Cards list supports FreeSync

FreeSync

 can only be used with specific AMD graphics card models. Refer to the following list for 

supported graphics cards:
Make sure to install the latest official graphics drivers from AMD that support 

FreeSync

.

 

For additional AMD graphics card models that support the 

FreeSync

 feature, visit the official AMD website 

(https://www.amd.com/en/products/specifications/graphics).

 

Select 

FreeSync

 

Off

 if you are using a graphics card from a different manufacturer.

 

When applying the 

FreeSync

 function via the HDMI cable, it may fail to work due to the bandwidth 

limitation of certain AMD graphics card.

 

Radeon™ RX Vega series

 

Radeon™ RX 500 series

 

Radeon™ RX 400 series

 

Radeon™ R9/R7 300 series (excluding R9 
370/X, R7 370/X, R7 265)

 

Radeon™ Pro Duo (2016 edition)

 

Radeon™ R9 Nano series

 

Radeon™ R9 Fury series

 

Radeon™ R9/R7 200 series (excluding R9 
270/X, R9 280/X)

Summary of Contents for LS34A654UXNXGO








































Reviews: