English - 7
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
1.
Press the
POWER
P
button on the remote control.
You can also use the
POWER
P
button on the TV.
The message
Select Language of the OSD.
is displayed.
2.
Press the
ENTER
E
button. Press the ▲ or ▼ button to select the language, then press
the
ENTER
E
button. The message
Select ‘Home Use’ when installing this TV in
your home.
is displayed.
.
Press the ◄ or ► button to select
Store Demo
or
Home Use
, then press the
ENTER
E
button. The message
Select the Antenna source to memorize.
is displayed.
We recommend setting the TV to
Home Use
mode for the best picture in your home
environment.
Store Demo
mode is only intended for use in retail environments.
If the unit is accidentally set to
Store Demo
mode and you want to return to
Home Use
(Standard): Press the volume
button on the TV. When the volume OSD is displayed, press and hold the
MENU
button on the TV for 5 seconds.
4.
Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the
ENTER
E
button to select
Start
.
Air
: Air antenna signal. /
Cable
: Cable antenna signal. /
Auto
: Air and Cable antenna signals.
In Cable mode, you can select the correct signal source among
STD, HRC
, and
IRC
by pressing the ▲, ▼, ◄ or ►
button, then press the
ENTER
E
button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
.
Press the
ENTER
E
button to select
Start
. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the
ENTER
E
button with
Stop
selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the
ENTER
E
button when channel memorization is complete. The message
Set the Clock Mode.
is
displayed.
6.
Press the
ENTER
E
button. Press the ▲ or ▼ button to select
Auto
, then Press the
ENTER
E
button. The message
Set to
daylight saving time.
is displayed. If you select
Manual, Set current date and time.
is displayed.
7.
Press the ▲ or ▼ button to select
Off, On
or
Auto
, then press the
ENTER
E
button.
8.
Press the ▲ or ▼ button to highlight the time zone for your local area. Press the
ENTER
E
button. If you have received a
digital signal, the time will be set automatically. If not, refer to the ‘Setting the Time’ instructions to set the clock.
(see page 28)
9.
The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the
ENTER
E
button.
10.
The message
Enjoy your TV
. is displayed. When you have finished, press the
ENTER
E
button.
If you want to reset this feature...
1.
Press the
MENU
button to display the menu. Press the ▲ or ▼ button to select
Setup
,
then press the
ENTER
E
button.
2.
Press the
ENTER
E
button again to select
Plug & Play
.
The
Plug & Play
feature is only available in the TV mode.
¦
N
N
N
N
N
N
N
N
N
N
Plug & Play
▶
Language
: English
Time
Game Mode
: Off
BD Wise
: On
Network Type
: Cable
Network Setup
V-Chip
Setup
Select Language of the OSD.
Language
: English
▶
E
Enter
Plug & Play
[640-NA]BN68-02089F-Eng.indb 7
2009-03-30 �� 3:47:00
