11
Connecting to cabinets
Connect the M-Box (SBB-MBOX) and the cabinet (IW008R) to the installed cabinet for video
signal transmission.
"
Connect the M-Box to the external device before connecting the M-Box to the cabinet.
"
Before connecting power to the cabinets, connect the BRIDGE BOX to the cabinets first.
"
Connect only one type of LED pitch cabinets to a single M-Box. Normal picture quality may
not be obtained if different types of cabinets are connected. Do NOT use different types of
LED pitch cabinets together.
LAN
DATA IN
DATA IN
DATA OUT 1
ONE CONNECT
BLUETOOTH
WI-FI
HDBT IN
HDBT OUT
DATA IN
DATA OUT2
M-Box
(SBB-MBOX)
Last cabinet (Vertical Pillar)
(IW008R)
BRIDGE BOX
First cabinet
(IW008R)
Last cabinet (Horizontal Pillar)
(IW008R)
1
Connect the HDBT terminals on the M-Box and BRIDGE BOX using a LAN cable.
"
Use a cable of CAT 6 (*STP type) or higher.
*STP: Shielded Twisted Pair
"
Connect the HDBT by using a LAN cable that is 15–100 m in length. If you use a cable that
is out of specified length range, the signal quality may be unstable.
"
Use the LAN cables recommended on the HDBaseT website (http://hdbaset.org/hdbaset-
recommended-cables). If a LAN cable that is not recommended is used, the HDBT signals
may become unstable.
2
Use cables enclosed with the M-Box(SBB-MBOX) unit to connect to the BRIDGE BOX and
cabinets.
Supported resolutions per installation
Resolution
1920 x 1080
3840 x 2160
7680 x 4320 (8K)
Quantity of cabinets
2 x 2
4 x 4
8 x 8
"
M-Box(SBB-MBOX) unit includes 8
ONE CONNECT
ports, supporting up to 8K resolution.
