English -
Setting Up
The following settings help set the functions.
To use the Function, (HDMI-CEC) must be set to On
1.
Press the
MENU
button. Press the ▲ or ▼ button to select “Application”,
then press the
ENTER
button.
2.
Press the ▲ or ▼ button to select “Anynet
+ (HDMI-CEC)”, then press the
ENTER
button.
3.
Press the
ENTER
button to select “ (HDMI-CEC)”.
4.
Press the ▲ or ▼ button to select “On”, then press the
ENTER
button.
The “ (HDMI-CEC)” function is enabled.
If you select Off, “ (HDMI-CEC)” is disabled.
When the “ (HDMI-CEC)” function is disabled, all the
related operations are deactivated.
Setting an Device to turn Off Automatically when the TV is Turned Off
1.
Press the ▲ or ▼ button to select “Auto Turn Off”, then press the
ENTER
button.
2.
Press the ▲ or ▼ button to select “Yes”, then press the
ENTER
button.
The “Auto Turn Off” function is enabled.
If you select “No”, the “Auto Turn Off” function is canceled.
Press the
EXIT
button to exit.
The active source on the TV remote must be set to TV to use the
function.
If you set “Auto Turn Off” to “Yes”, connected external devices are also turned
off when the TV is turned off. If an external device is still recording, it may or
may not turn off.
➣
➣
➣
➣
➣
➣
➣
Scanning and Switching between Devices
1.
Press the
TOOLS
button.
Press the ▲ or ▼ button to select “Device List”, then press the
ENTER
button.
devices connected to the TV are listed.
If you cannot find a device you want, press the red button to scan for devices.
2.
Press the ▲ or ▼ button to select to a particular device and press the
ENTER
button. It is switched to the selected device.
Only when you set “ (HDMI-CEC)” to On in the “Application” menu, the
“Device List” menu appears.
Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
The time required to scan for devices is determined by the number of connected devices.
When the device scan is complete, the number of devices found are not displayed.
Although the TV automatically scans devices when it is turned on using the
POWER
button, devices connected when
the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search
devices.
If you have selected external input mode by pressing the
SOURCE
button, you cannot use the function. Make
sure to switch to an device by using the
TOOLS
button.
➣
➣
➣
➣
➣
➣
➣
➣
(HDMI-CEC)
(HDMI-CEC) : ON
Auto Turn Off
:
Off
On
Return
Enter
Move
Application
WISELINK
(HDMI-CEC)
►
(HDMI-CEC)
(HDMI-CEC) : On
Auto Turn Off
:
No
Yes
Return
Enter
Move
Tools
Device List
Record
Timer Recording
Receiver
:
Off
Picture Mode
: Standard
Sound Mode
:
Custom
Sleep Timer
:
Off
SRS TS XT
:
Off
▼
e
Exit
Enter
Move
BN68-01412J-ENG.indb 66
2008-04-28 ¿ÀÈÄ 1:29:18
