English-2
auto Wide:
Automatically adjusts the picture size to the "6:9" aspect ratio.
16:9:
Adjusts the picture size to 6:9 appropriate for DVDs or wide broadcasting.
Zoom:
Magnifies the 6:9 wide picture (in the vertical direction) to fit the screen size.
4:3:
This is the default setting for a video movie or normal broadcasting.
You can select the picture size which best corresponds to your
viewing requirements.
1.
Press the
menu
button to display the menu.
Press the
5
or
6
button to select "Picture", then press the
enter
button.
2.
Press the
5
or
6
button to select "Size", then press the
enter
button.
3.
Select the required option by pressing the
5
or
6
button.
Press the
enter
button.
4.
Press the
exit
button to exit.
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
Freezing the Current Picture
“Auto Wide” function is available only in “TV”, “Ext”, “Ext2”, “AV”, and “S-Video” mode.
In PC Mode, only "6:9" and "4:3" mode can be adjusted.
Select by pressing the
3
or
4
buttons. Use the
5
or
6
button to move the picture up
and down. After selecting , use the
5
or
6
button to magnify or reduce the picture size
in the vertical direction.
resetting the Picture Settings to the Factory defaults
Changing the Picture Size
If the broadcast signal received by your TV is weak, you can activate the Digital Noise
Reduction feature to help reduce any static and ghosting that may appear on the
screen.
1.
Press the
menu
button to display the menu.
Press the
5
or
6
button to select "Picture", then press the
enter
button.
2.
Press the
5
or
6
button to select "Digital NR", then press the
enter
button.
3.
Press the
5
or
6
button to select "On" or "Off". Press the
enter
button.
4.
Press the
exit
button to exit.
digital noise reduction
You can return to the factory defaults picture settings.
1.
To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number to 4 on page .
2.
Press the
5
or
6
button to select "Reset", then press the
enter
button.
3.
Press the
exit
button to exit.
The "Reset" will be set for each picture mode.
You can select these options by
simply pressing the
P.SiZe
button
on the remote control.
BN68-01007C-00Eng.indd 12
2006-03-03 ¿ÀÈÄ 3:03:11