Samsung LA32R8 Page 11 Owner'S Instructions Manual Download

Page: 11 / 65

english -

Switching on and off

the mains lead is attached to the rear of your set.
.

Plug the mains lead into an appropriate socket.

The standby indicator lights up on the front of the set.

Press the button on the front of the set.

You also can press the

PoWer

button or the

tV/dtV

button on the remote control to turn

the TV on.

The programme that you were watching last is reselected automatically.

Press the numeric button (0~9) or channel up/down (

) button on the remote control or

CH button on the right side of the set.

To switch your set off, press the

PoWer

button again.

Your set can be placed in standby mode in order to reduce the power consumption. the standby

mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example).
.

Press the

PoWer

button on the remote control.

The screen is turned off and a red standby indicator appears on the front of your set.

To switch your set back on, simply press the

PoWer

, numeric buttons

(0~)

tV/dtV

button or

channel up/down ( /

) button again.

Do not leave your set in standby mode for long periods of time

(when you are away on holiday, for example).

It is best to unplug the set from the mains and aerial.

Placing Your television in Standby mode

Lift the cover at the back of the remote control upward as shown in the

figure.

Install two AAA size batteries.

Make sure to match the "+" and "–" ends of the batteries with the

diagram inside the compartment.

Replace the cover.

Remove the batteries and store them in a cool, dry place if you won’t be

using the remote control for a long time. The remote control can be used

up to about 23 feet from the TV.

(Assuming typical TV usage, the batteries last for about one year.)

If the remote control doesn’t work, check the following:

Is the TV power on?

Are the plus and minus ends of the batteries reversed?

Are the batteries drained?

Is there a power outage, or is the power cord unplugged?

Is there a special fluorescent light or neon sign nearby?

installing batteries in the remote Control

BN68-01180C-00Eng-0911.indd 9

2007-09-11 �� 3:17:18

Summary of Contents for LA32R8


































































Search results

Summary of Contents for LA32R8

Reviews:

Related manuals for LA32R8

Brands by name

Popular brands

Samsung LA32R8, Owner'S Instructions Manual

Search results

Summary of Contents for LA32R8

Reviews:

Related manuals for LA32R8

Brands by name

Popular brands