38
English
Advanced Features
¦
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
1.
Select
Receiver
and set to
On
.
2.
Press the
EXIT
button to exit.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the
DIGITAL AUDIO
OUT (OPTICAL)
jack of the TV.
✎
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
TV is displaying a DTV (aerial) signal, the TV will send out 5.1 channel sound to the receiver. When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
✎
If there is a power interruption to the TV when the
Receiver
is set to
On
(by disconnecting the power cord or a
power failure), the
Speaker Select
may be set to
External Speaker
when you turn the TV on again.
✎
NOTE
x
You can only control devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the device.
x
The functions do not operate with other manufacturers’ products.
¦
Troubleshooting for
Problem
Possible Solution
does not work.
•
Check if the device is an device. The system supports devices only.
•
Connect only one receiver (home theatre).
•
Check if the device power cord is properly connected.
•
Check the device’s Video/Audio/HDMI Cable connections.
•
Check whether (HDMI-CEC) is set to On in the setup menu.
•
Check whether the TV remote control is in TV mode.
•
Check whether it is exclusive remote control.
•
doesn’t work in certain situations. (Searching channels, operating
Media Play
or
Plug & Play
(Initial
setup), etc.)
•
When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
•
Check if the Function of device is set on.
I want to start .
•
Check if the device is properly connected to the TV and check if the (HDMI-CEC) is set to
On in the Setup menu.
I want to exit .
•
Select
View TV
in the menu.
•
Press the
SOURCE
button on the TV remote control and select a device other than devices.
•
Press
P
>
/
<
, PRE-CH, and
FAV.CH
to change the TV mode. (Note that the channel button operates only
when a tuner-embedded device is not connected.)
The message “Connecting to
device...” appears on the
screen.
•
You cannot use the remote control when you are configuring or switching to a view mode.
•
Use the remote control when the setting or switching to view mode is complete.
The device does not play.
•
You cannot use the play function when
Plug & Play
(Initial setup) is in progress.
The connected device is not
displayed.
•
Check whether or not the device supports functions.
•
Check whether or not the HDMI Cable is properly connected.
•
Check whether
(HDMI-CEC)
is set to
On
in the setup menu.
•
Search devices again.
•
You can connect an device using the HDMI Cable only. Some HDMI cables may not support
functions.
•
If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
The TV programme cannot be
recorded.
•
Check whether the antenna jack on the recording device is properly connected.
The TV sound is not output
through the receiver.
•
Connect the optical cable between TV and the receiver.
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV speaker.
