Samsung KR-X14ATSCH-1, E-Manual, Page: 163 / 192

156 157
The computer won't connect.
There is something wrong
with the TV.
Try this!
The "Mode Not Supported"
message appears.
Set your PC’s output resolution so it matches a resolution supported by the TV.
The video is OK but there is
no audio. If you are using an HDMI connection, check the audio output setting on your PC.
If you are using a DVI to HDMI cable, a separate audio cable is required.
I can't connect to the Internet.
There is something wrong
with the TV.
Try this!
The wireless network
connection failed.
Make sure the TV is connected to a wireless IP router.
The software update over
the Internet has failed.
Check the network connection status.
If the TV is not connected to a network, connect to a network.
The upgrade stops if you already have the latest software version.
The Schedule Recording/Timeshift function isn't
working.
There is something wrong
with the TV.
Try this!
The TV cannot recognize the
USB device or the
Format
Device
,
Check Device
and
Device Performance Test
.
Refer to the USB device's manual and see if data can be stored on it.
Check if the USB device is in a locked state.
Check if the USB device was formatted when it was connected to a computer.
Formatting a USB device after connecting it to the TV may result in a formatting
failure. If
Device Performance Test
or
Format Device
has failed, there may be
a problem with the USB device or its specifications. Try using a different USB
device.
There is a message saying I
need to format the USB storage
device.
Check if the USB device is in a locked state.
Use the USB recovery function to recover the USB device.
Schedule Recording
cannot be
used.
Check if there is a USB device connected to the TV.
Check if the channel is a digital channel that can be recorded. Recording will
automatically stop if the signal becomes too weak. The Timeshift function will
not work if there isn't enough storage space on the USB device.
I get a performance test failure
message and then
Schedule
Recording
and the Timeshift
operation stops working.
This problem can occur when using a low-performance USB storage device
that does not support recording. A USB hard drive with a speed of 5,400rpm or
above is recommended. A USB memory Stick is not supported.