![background image](http://html.mh-extra.com/html/samsung/jitterbug-sph-a120/jitterbug-sph-a120_manual_1193080021.webp)
39
SECTION
3
38
SECTION
3
Turn the ringer off by opening the
phone and pressing the volume
button until
"Silent"
appears on the
screen. Your phone will vibrate to alert
you to incoming calls.
When the phone is open:
You can send a caller directly to your
Voicemail by pressing the button when
you see
“Answer?”
at the bottom of the
screen. This will also give an unavailable
message if you do not have voicemail.
Your phone continues to ring until:
* You answer the call.
* The calling party ends the call.
* The call is sent to Voicemail.
Placing a Call
Dialing Manually:
You can dial a call from any screen on your
phone.
1.
Dial the number using your keypad.
2.
Press the button when you see
"Call?"
at the bottom of your screen.
3.
If you make a mistake while dialing,
press the key for each incorrect
number until you’ve deleted the error.
A dial tone means that service is
available. If it’s not, you’ll see
“No Service.”
Calling the Jitterbug Operator:
Ask a Jitterbug operator to connect you
to anyone on your Phone List, or to any
number in the U.S. or Canada.
1.
Press the
“O”
button.
2.
Press the button when you see
“Call?”
at the bottom of the screen.
“Calling Operator”
will appear.
NOTE
NOTE
TIP
GH68-12706A_Dial_101006.qxp 10/16/06 6:02 PM Page 41