English
_69
● MENU SETUP
Camera Event
You can set whether to react to camera events (motion detection, video analysis, audio events) and alarm
output / time.
[
MENU
]
<
Event
>
►
<
Camera Event
>
[
ENTER
]
◄►
[
ENTER
]
• Mode : Select whether to react to camera events or not.
• Alarm Out : Sets the alarm output method.
• Alarm Duration : Sets the duration of alarm signal and alarm sound.
M
`
The NVR generates alarm output only when the connected network camera is configured to detect events and an actual
event is detected.
Video Loss Detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
[
MENU
]
<
Event
>
►
<
Video Loss Detection
>
[
ENTER
]
◄►
[
ENTER
]
• Video Loss State : Specify the use of video loss detection.
• Alarm Out : Select an alarm output method.
`
For details, refer to "
HDD alarm
>
alarm
". (Page 60)
• Alarm Duration : Specify the duration of the alarm output with the beep.
