English
_29
● LIVE
Name
Description
Video Input
Status
Displayed if no input is entered in the condition that the camera is set to <
ON
>.
Displayed if no permission to live view is granted.
If the camera is set to <
OFF
> or <
Covert2
>, nothing will be displayed on the screen.
If the camera is set to <
Covert1
>, the video will be displayed but the OSD menus will
not be displayed.
䌠䌜
SRN-1670D : In 16/9-split Live mode, if the camera video is created in a high definition,
no video will be displayed but this icon.
SRN-470D : If the resolution of a camera video exceeds 1600x1200, the channel of the
video source will be shown as HD.
`
For a proper video playback, the connected camera should support a low resolution
profile as well.
For this, you should add a low resolution profile, which you can perform in the setup
page of the connected camera.
Camera Title / Channel
Display the camera title and channel number.
Camera
Operation
This icon is displayed for a channel that a PTZ-featuring camera is connected to.
Displays AUDIO ON/MUTE.
Not displayed in video mode if deactivated.
If the sensor is set to <
ON
>, the input signal will be displayed on the screen of the
connected channel.
Set the camera event detection to <
ON
>, and a camera event will be displayed when
occurred.
Displays the current record mode from Record/Event/Schedule.
Error Information
• If the internal HDD is not connected, the "NO HDD"(
) message will appear; if there occurs a problem, you
will see the "HDD FAIL"(
) message in the top left corner. In this case, make sure you contact the service
center for assistance as this may cause a failure of recording, playback or backup.
• If the cooling fan does not work properly or has a problem, the <
Fan Information
> window will appear and
the fan error icon (
) will be displayed on the top left corner.
In this case, check to see if the internal fan works.
As a fan error can shorten the product life, make sure you contact the service center for assistance.
M
`
If you see the fan error icon or NO HDD, HDD FAIL icons on the screen, contact the service center for more details.
