Samsung iPolis SNP-6200RH, User Manual, Page: 99 / 142

English _99
●
Setup
Screen
network disconnect
This can be set to generate an event signal when the physical network connection is cut
off.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < network disconnect >.
3. Specify the use of “Network
disconnect”.
4. Specify the activation time and
activation condition.
`
For more information about < Activation
time > and < Action >, refer to “ Alarm input ”.
(page 91)
5. When done, click [ apply ( ) ].
audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the
< event ( ) > tab.
2. Click < audio detection >.
3. Set whether or not to < enable >.
4. Set the audio detection’s sound level.
The lower the level, the smaller the
sound change is detected.
M `
The audio detection level is designed
to normalize the input data to a value
between 1 and 100 and detect the signal
larger than threshold level. It is unrelated
to the decibel (dB) level.
5. Specify the activation time and activation
condition.
`
For more information about < Activation
time
> and <
Action
>, refer to “
Alarm input ”. (page 91)
6. When done, click [ apply ( ) ].
M
`
If detected audio level is too low, set the audio input gain to a higher level in < Audio setup >.