setup screen
92_
setup screen
va / mD
This can be set to generate an event signal when a motion or intelligent video analysis event
is detected.
1.
From the Setup menu, select the
<
event ( )
> tab.
2.
Click <
va / mD
>.
J
`
DIS cannot be used if VA/MD is used.
`
to use motion detection (mD)
1.
Select a motion detection mode.
2.
Set <
motion Detection function
> to
<
enable
>.
3.
Set the area of motion to be detected.
•
Minimum Object Size : To set the
minimum size of detected motions,
select <
minimum object Size
> and
then point and drag to the desired
size on the screen using the mouse.
•
Maximum Object Size : To set the
maximum size of detected motions,
select <
maximum object Size
> and
then point and drag to the desired size on the screen with your mouse.
•
Defined area based rules : Detect the occurrence of change in the motion of
objects in user set area.
J
`
Motions smaller than the specified minimum size or bigger than the maximum size are not
detected. To avoid unintended detections caused by great and small noises, set minimum/
maximum motion sizes appropriately in accordance to your environments.
Note that same motions on the same location can be differently detected in their detection size;
it is recommended to consider and include the tolerable difference when setting the minimum/
maximum detection sizes.
4.
Set the sensitivity to distinguish the background and motion on the monitored screen.
5.
Specify the activation time and activation condition.
`
For more information about <
Activation time
> and <
Action
>, refer to “
Alarm input
”. (page 91)
6.
When done, click [
apply (
)
].