manualshive.com logo in svg

Samsung iPolis SNP-6200RH, User Manual, Page: 23 / 142

Share
Download
Samsung iPolis SNP-6200RH User Manual Download Page 23

English 

_23

●

  

in

St

aLL

ation & connection

notes for waterproofing

This model is an integrated housing product for outdoor installation.

 

`

when combining the main body and the wall mount for installation on the 

wall

1. 

Install the wall mount on the vertical 

wall. When it is installed on an inclined 

wall, moisture may permeate into the 

main body through the external cable.

2. 

Wrap the screw part of the housing with 

a sufficient amount of Teflon tape for 

assembly.

3. 

Please make sure that the gasket is 

not disassembled from the shield cover 

when the shield cover is separated and 

mounted on the housing body.

4. 

Install the wall mount adapter for 

waterproofing, and apply the silicon 

sealant between and around the wall 

and wall mount for sealing.

 

J

 

`

Take particular caution to ensure that there 

is proper sealing if the installed side is not 

flat.

Wall mount 

Silicon  

sealant

Concrete wall

Screw  

unit

Teflon tape

Shield gasket 

Summary of Contents for iPolis SNP-6200RH















































































































































Reviews:

No comments