manualshive.com logo in svg

Samsung iPolis SNP-6200RH, User Manual, Page: 20 / 142

Share
Download
Samsung iPolis SNP-6200RH User Manual Download Page 20

installation & connection

20_

 installation & connection

 

J

 

`

This product is a network camera that transfers video over a network; the video output terminal is 

used to set the imaging range of the camera at installation.

 

`

Using the terminal for monitoring purposes may cause problems such as degradation in video 

quality.

 

`

It is not suitable for 24-hour monitoring using professional CRT monitors or TFT/LCD portable 

monitors.

 

`

Use the network transfer screen for 24-hour monitoring and storage.

inStaLLation

preparing & installing camera Bracket

For installation guidelines for brackets and housings, refer to the installation manual that is 

enclosed with the bracket or housing.

 

`

available Bracket models

Model

Item

SBP-300WM1

Wall Mount

SBP-300WM

SBP-300CM

Ceiling Mount

SBP-300LM

Parapet Mount

SBP-300KM

Corner Mount

SBP-300PM

Pole Mount

 

M

 

`

See “

Optional Accessories for Installation

” for the appearance of each bracket (unbundled).  

(page 24)

Summary of Contents for iPolis SNP-6200RH















































































































































Reviews:

No comments