manualshive.com logo in svg

Samsung iPolis SND-5011, User Manual, Page: 57 / 106

Share
Download
Samsung iPolis SND-5011 User Manual Download Page 57

networK Setup

interface

1. 

From the Setup menu, select the 

<

network (   )

> tab.

2. 

Click <

interface

>.

3. 

Set the <

interface

> and <

ipv6 

setup

> as necessary. 

 

•

IP type : Select an IP connection 

type.

 - Manual : Specify the IP address, 

Subnet mask, Gateway, DNS1, 

and DNS2. 

 - DHCP : Specify the DNS1 and 

DNS2.

 - PPPoE : Specify the DNS1, DNS2, ID and Password. 

 

`

If you set it to <

Manual

>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.

 

•

MAC address : Shows the MAC address. 

 

•

IP address : Displays the current IP address. 

 

•

Subnet mask : Displays the <

Subnet mask

> for the set IP. 

 

•

Gateway : Displays the <

Gateway

> for the set IP. 

 

•

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address. 

 

•

Default : Use the default IPv6 address.

 

•

DHCP : Display and use the IPv6 address obtained from the DHCP server.

 

•

Manual : Enter IP address and gateway manually and use it.

4. 

When done, click [

apply ( 

 )

].

 

J

 

`

The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous 

settings will be restored automatically.

English 

_57

●

  

Setup 

Screen

Summary of Contents for iPolis SND-5011











































































































Reviews:

No comments