NETWORK CAMERA
User’s Manual
64
NETWORK CAMERA
User’s Manual
65
Ch5. How to Operate Camera
5.2.5. SSNR
5.2.6. DAY/NIGHT
This function reduces the background noise in a low luminance environment.
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and Down
buttons so that the arrow indicates ’SSNR’.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up and
Down buttons so that the arrow indicates DAY/NIGHT.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
2. Press the SET button. Then you can adjust the noise
reduction level.
• When adjusting the noise reduction level of the SSNR mode, remember that the higher the level set, the more
the noise level will be reduced but that after image may also occur.
Notes
OFF : Not being used
3. Select a desired mode using the Function Setup switch and press the switch.
• Because there can be a difference in the effectiveness of HLC according to the amount of
light area in the screen, optimize the installation angle for the best HLC performance.
• In a dark environment, the HLC is only activated when a high light that is larger than a
certain area is present.
• The HLC is not activated in light or overly dark conditions.
Notes
Select ‘BLC‘ to adjust the area to be
enhanced and enhancement level.
HLC : Enable a user to select a mask color
of high light area from a picture.