NETWORK CAMERA
User’s Manual
62
NETWORK CAMERA
User’s Manual
63
Ch5. How to Operate Camera
• ATW
: Select this when the color temperature is between 1800°K and 10500°K.
• INDOOR : Select this when the color temperature is between 4500°K and 8500°K.
• OUTDOOR : Select this when the color temperature is between 1800°K and 10500°K.
(sodium light inclusion)
• AWC
→
SET : To find the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press
the SET button. If the environment changes, readjust it.
• MANUAL : Select this to fine-tune White Balance
manually. Set White Balance first by using
the ATW or AWC mode. After that switch
to MANUAL mode, fine-tune the White
Balance and then press the SET button.
White Balance may not work properly under the following conditions. In this case select the AWC mode.
• When the color temperature of environment surrounding the subject is out of the control range (e.g. clear sky,
or sunset)
• When the ambient illumination of the subject is dim.
• If the camera is directed towards a fluorescent light or is installed in a place where illumination changes
dramatically, the White Balance operation may become unstable.
Notes
5.2.3. WHITE BALALACE (WHITE BAL.)
5.2.4. BACKLIGHT
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up and
Down buttons so that the arrow indicates ‘White Bal.’.
2. Select a desired mode using the Up and Down buttons.
* Select one of the following 5 modes, as appropriate for your purpose.
This camera is designed so that it delivers a distinctive subject and background at the
same time, even when the subject is in backlight, unlike conventional cameras, by
adopting a proprietary W-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Function
Setup switch so that the arrow indicates ‘BACKLIGHT‘.
BLC
OFF
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
2. Select a desired mode using the Function Setup switch depending on the camera
purpose.
BLC : Enables a user to directly select a desired area from a picture, and to view the
area more clearly.
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible to
view car license plates efficiently.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the screen,
remove the high light to see license plates clearly.