Section 2I: Using Voice Recognition
112
Using Send Text <Name>
With a single voice command you can launch the text message client
on the phone and specify a recipient for the message.
To launch a text message:
1.
Press and hold
.
2.
Say “Send Text” followed immediately by the name of a person
in your contact list and, optionally, the type of the number you
want to send it to. For example, say “Send Text John Smith.”
If you do not specify the number type and there are multiple
numbers for the name, VoiceSignal chooses the mobile number by
default.
If you say the “Send” command without specifying a recipient,
VoiceSignal prompts you with “Say the name.” Say the name of a
person in your contact list and, optionally the type of number.
Using Lookup <Name>
You can look up and display contact information for any person
stored in your contact list by saying “Lookup,” followed by the name.
To use Lookup <Name>:
1.
Press and hold
.
2.
Say “Lookup John Smith.” The IP-A790 Contacts application for
the specified contact is displayed.
If you say only “Lookup,” VoiceSignal prompts you with “Say the
name.”
Summary of Contents for IP-A790
