Samsung iES4028F, Management Manual

Page: 215 / 712

Power Over Ethernet Settings
3-159
3
Setting a Switch Power Budget
A maximum PoE power budget for the switch (power available to all switch ports)
can be defined so that power can be centrally managed, preventing overload
conditions at the power source. If the power demand from devices connected to the
switch exceeds the power budget setting, the switch uses port power priority
settings to limit the supplied power.
Command Attributes
Power Allocation – The power budget for the switch. If devices connected to the
switch require more power than the switch budget, the port power priority settings
are used to control the supplied power. (Range: 37 - 180 watts; Default: 180 Watts)
Web – Click PoE, Power Config. Specify the desired power budget for the switch.
Click Apply.
Figure 3-92 Setting the Switch Power Budget
CLI – This example sets the PoE power budget for the switch to the maximum level.
Displaying Port Power Status
Use the Power Port Status page to display the current PoE power status for all ports.
Command Attributes
• Port – The port number.
• Admin Status – The administrative status of PoE power on the port.
• Mode – The current operating status of PoE power on the port.
• Power Allocation – The configured power budget for the port.
• Power Consumption – The current power consumption on the port.
• Priority – The port’s configured power priority setting.
Console(config)#power mainpower maximum allocation 180 4-214
Console(config)#