Samsung
i
DCS500
DCS (Euro) Keyset User Guide
– 9 –
OUTSIDE CALLS
MAKING AN OUTSIDE CALL
1. Lift the handset and press an idle outside line key, line group key or dial
a line access code to receive dial tone.
OR
To use the speakerphone, press an idle outside line key or line group
key, or dial a line access code, to receive dial tone through the speaker.
OR
Press the
SPEAKER
key, receive internal dial tone and dial a line access
code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the
ANS/RLS
key.
Note: You will receive No More Calls tone if you attempt to make a call and there is
no CALL key programmed.
§
If Least Cost Routing (LCR) is enabled on your phone system, there may
be a key labelled LCR or it may be selected by dialling the access code
(e.g. ‘9’) which is set during system installation.
§
If your system is programmed to require an authorisation code before you
can make a call, dial
Ý
plus a valid code before selecting a C.O. line.
§
If your system is programmed to require an account code before you can
make a call, press the
ACCT
key or ACCT soft key, or dial
47
, followed
by a valid account code. Press the
ACCT
key again (or the ACCT soft
key) and then select a C.O line.
For more information on authorisation and account codes, see your system
administrator.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the
SPEAKER
key
before dialling.
