iDCS 500
PROGRAMMING
TECHNICAL MANUAL
PART 2 NOVEMBER 2001
MMC: 715
PROGRAMMED STATION MESSAGE
DESCRIPTION:
Allows custom messages to be programmed or default messages to be changed.
Messages are written via the keypad. Each press of a key will select a character.
Pressing a different key will move the cursor to the next position. For example, if the
message is “Sunbathing,” press the number “7” three times to get the letter “S.”
Now press the number “8” twice to get the letter “U.” Continue selecting characters
from the table below to complete your message. Pressing the “A” key will change
the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right or the DOWN
key to move the cursor to the left. A space can be entered by using these keys.
•
DCS KEYSETS
COUNT
1 2 3 4 5
DIAL 0
Q Z . ) 0
DIAL 1
space ?
,
!
1
DIAL 2
A B C @ 2
DIAL 3
D E F # 3
DIAL 4
G H I $ 4
DIAL 5
J K L % 5
DIAL 6
M N O ^ 6
DIAL 7
P R S & 7
DIAL 8
T U V
✱
8
DIAL 9
W X Y ( 9
DIAL
✱
✱
✱
✱
: = [ ]
✱
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %,
$, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
HELP
Table of
Contents
HOME
PAGE
