iDCS 500
PROGRAMMING
TECHNICAL MANUAL
PART 2 NOVEMBER 2001
MMC: 104
STATION NAME
DESCRIPTION:
Allows the system administrator or technician to enter an 11-character name to
identify an individual station.
Messages are written using the keypad. Each press of a key will select a character.
Pressing the dial pad key will move the cursor to the next position. For example, if
the directory names is “SAM SMITH” press the number “7” three times to get the
letter “S”. Now press the number “2” once to get the letter “A”. Continue selecting
characters from the table below to complete message. Pressing the “A” key will
change the letter from upper case to lower case.
NOTE: When the character you want appears on the same dial pad key as the
previous character, press the UP key to move the cursor to the right.
•
DCS KEYSETS
COUNT
1 2 3 4 5
DIAL 0
Q Z . ) 0
DIAL 1
space ?
,
!
1
DIAL 2
A B C @ 2
DIAL 3
D E F # 3
DIAL 4
G H I $ 4
DIAL 5
J K L % 5
DIAL 6
M N O ^ 6
DIAL 7
P R S & 7
DIAL 8
T U V
✱
8
DIAL 9
W X Y ( 9
DIAL
✱
✱
✱
✱
: = [ ]
✱
The # key can be used for the following special characters: #, space, &, !, :, ?, ., %,
$, -, <, >, /, =, [, ], @, ^, (, ), _, +, {, }, |, ;, \, " and ~.
HELP
Table of
Contents
HOME
PAGE
