BUSY STATION CALLBACK
When you call another station and receive a busy signal:
•
Press the
CBK
key, if programmed, or dial
44
.
•
When the busy station becomes free, your keyset will ring.
•
Lift the handset or press
ANS/RLS
to call the now idle station.
NOTES:
1.
A callback will be canceled if not answered within 30 seconds. If you
have set a callback, your
CBK
key will light.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
BUSY STATION CAMP-ON
When you call another station and receive a busy signal but you do not want
to wait for a callback:
MANUAL CAMP-ON
•
Press the
CAMP
key or dial
45
.
•
The called station will receive off-hook ring tone repeated every few sec-
onds and its first available
CALL
button will flash green to indicate your
call is waiting.
•
Wait for the called party to answer.
•
The called station must release its first call or place it on hold before
answering your camp-on.
NOTES:
1.
If you receive No More Calls tone, that station has no available key to
accept your call. Hang up or leave a message.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before dialing.
AUTO CAMP-ON [L VERSION ONLY]
When you want to automatically camp on to a busy station without pressing
the camp on button every time you call a busy station, you can set your
phone for auto camp-on.
•
With the handset on-hook, press
TRANSFER
and then dial
110
.
•
Dial
081
to turn on auto camp-on or
080
to turn it off.
•
Press
TRANSFER
to store your selection.
17
16
INTERCOM CALLS
CALLING OTHER STATIONS
•
Dial the extension number or group number.
•
Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the station you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
•
Finish the call by replacing the handset or pressing the
ANS/RLS
key.
NOTES:
1.
If you have a
DSS
key assigned to an extension or station group, you
may press this key instead of dialing the number.
2.
If the Hot Keypad feature has been turned off, you must first lift the hand-
set or press the
SPEAKER
key before you begin dialing.
ANSWERING INTERCOM CALLS
•
When your keyset rings, simply lift the handset—
OR
—press the
ANS/RLS
key to be connected to the calling station.
•
Finish the call by replacing the handset or pressing the
ANS/RLS
key.
VOICE ANNOUNCE MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and you will hear the caller’s announcement.
•
Press
ANS/RLS
to turn on the microphone and speak handsfree—
OR
—
lift the handset to reply.
•
To finish the call, replace the handset or press the
ANS/RLS
key.
AUTO ANSWER MODE
(INTERCOM CALLS ONLY)
When another station calls you, your keyset will sound a brief attention tone
and then automatically answer the call.
•
Your microphone and speaker are turned on and you can speak hands-
free. For privacy, use the handset.
•
To finish the call, replace the handset or press the
ANS/RLS
key.
