CONVENIENCE FEATURES
DO NOT DISTURB
Use Do Not Disturb (DND) when you want to block calls to your keyset.
• Lift the handset and then dial
401
.
• To cancel DND, lift the handset and then dial
400.
You are able to make calls while in the DND mode.
ANSWERING THE DOOR PHONE
When your station is programmed to receive calls from the door phone:
• You will receive three short rings repeatedly.
• Lift the handset and you will be connected to the door phone.
• If an electric door lock release is installed, hookflash, receive confir-
mation tone and dial
13
to release the lock.
CALLING THE DOOR PHONE
(
ROOM MONITORING)
You can call the door phone and listen to what is happening outside or in
another room.
• Lift the handset and then dial the extension number of the door box.
• You will be connected to the door phone. You can listen or have a
conversation.
• If an electric door lock release is installed, hookflash, receive confir-
mation tone and dial
13
to release the lock.
ACCOUNT CODES
When it is equipped with optional equipment, your iDCS system allows calls
to be charged to different accounts. You can enter an account code in two
ways. To enter an account code by interrupting the conversation:
• While on an outside call, hookflash, receive confirmation tone and
dial
47
.
• Dial the account code (it may be a maximum of 12 characters includ-
ing
4
and
#
).
• Hookflash to return to the conversation.
• If you make an error, repeat the procedure with the correct code. Only
the last account code dialed will be recorded.
CANCELING A MESSAGE
You can cancel a message indication that you have left at another station.
• Lift the handset.
• Dial
42
plus the extension number of that station.
To cancel all message indications left at your phone:
• Lift the handset and dial
42
plus your extension number.
• Replace the handset.
PROGRAMMED MESSAGES
When you will be away from your phone for any length of time, you may
leave a programmed station message. Display stations calling you will see
this message and be informed of your status or follow your instructions.
• Lift the handset and dial
48
plus any message code,
01–20
for
iDCS
100
and
iDCS 500 M
version software or
01–30
for
iDCS 500 L/LE
version software, listed on the back of this user guide.
• Listen for confirmation tone and hang up.
• To cancel this message, lift the handset and dial
48
plus
00
.
19
18
HOME PAGE
Table of Contents
Guide-Contents
