background image

ENG - 23

 

Volume Restriction function

 

To protect your hearing, the Volume Restriction function restricts the volume to 20 if 
you turn on the Soundbar when the volume is set higher than 20.

 

– The default value for the Volume Restriction function is Off. You must turn it on to 

activate it.

 

– When turned on, the Volume Restriction function stays on even when the power is 

turned off.

 

– To turn Volume Restriction on or off, press and hold the 

Down

 button on the 

remote control for 5 seconds. With Volume Restriction off, “

V FREE

” appears on 

the front display. With the function on, “

V LOCK

” appears.

Sound Control

VOL

WOOFER

SOUND

MODE

PAIR

You can select 

TREBLE

BASS

, or 

AUDIO SYNC

 

To control the volume of the treble or bass sound, press the 

Sound Control

 button to 

select 

TREBLE

 or 

BASS

 and then adjust the volume between -6~+6 by using the 

Up/

Down

 buttons.

 

Press and hold the   

(Sound Control)

 button for about 5 seconds to adjust the sound 

for each frequency band. 150Hz, 300Hz, 600Hz, 1.2kHz, 2.5kHz, 5kHz, and 10kHz are 

selectable using the 

Left/Right

 buttons and each can be adjusted to a setting between 

-6 to +6 using the 

Up/Down

 buttons.

 

If the video on the TV and audio from the Soundbar are not synchronized, press the 

Sound Control

 button to select 

AUDIO SYNC

 and then set the audio delay between 

0~300 milliseconds

 by using the 

Up/Down

 buttons. (Not available in “

USB

” or 

BT

”mode.)

 

AUDIO SYNC

 is only supported for some functions.

VOL

WOOFER

SOUND

MODE

PAIR

WOOFER

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

Rock the 

WOOFER

 button forward or backward to adjust the volume of the subwoofer to 

-12 or between -6 to +6. To set the subwoofer volume level to 0, press the button in.

VOL

WOOFER

SOUND

MODE

PAIR

VOL

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

SOU

ND

MO

DE

VOL

WOOFE

R

SOUNDB

AR

Rock the 

VOL

 button forward or backward to adjust the volume.

 

Mute

 

Press the 

VOL

 button in to mute the sound. Press it in again to unmute the sound.

Summary of Contents for HW-T550













































































Reviews: