ENG - 27
If the device fails to connect
•
If you have an existing Soundbar (e.g.,
[AV] Samsung Soundbar S5A-Series
) on the list of
speakers on the Samsung TV, delete it.
•
Then repeat steps 1 through 3.
Disconnecting the Soundbar from the Samsung TV
Press the
(Source)
button on the top panel or on the remote control to select the mode other than
“
Bluetooth
”.
•
Disconnecting takes time because the Samsung TV must receive a response from the Soundbar.
(The time required may differ, depending on the Samsung TV model.)
TV Auto connect On/Off
To cancel the automatic Bluetooth connection between the Soundbar and TV, press the
Left
button on
the remote control for 5 seconds with the Soundbar in “
Bluetooth Ready
” status. (Toggle On → Off)
Left button
LED Indicator
5 Sec
Cyan Blinks X1
On (Default)
Off
Red Blinks X1
Bluetooth Ready
Toggle On
Off
Notes on Bluetooth connection
•
Locate a new device within 1 m to connect via Bluetooth communication.
•
If asked for a PIN code when connecting a Bluetooth device, enter <0000>.
•
The Soundbar automatically turns off after 20 minutes in the Ready state.
•
The Soundbar may not perform Bluetooth search or connection correctly under the following
circumstances:
–
If there is a strong electrical field around the Soundbar.
– If several Bluetooth devices are simultaneously paired with the Soundbar.
– If the Bluetooth device is turned off, not in place, or malfunctions.
•
Electronic devices may cause radio interference. Devices that generate electromagnetic waves
must be kept away from the Soundbar main unit - e.g., microwaves, wireless LAN devices, etc.
