ENG - 19
3. ID SET
Press the
Up
button on the remote control for 5 seconds.
•
Until pairing is complete, the Multicolour LED changes as
Red
→
Green
→
Blue
in turn.
Remote Control Button
LED Indicator
SOUN
D
MOD
E
PAIR
5 Sec
Red
→
Green
→
Blue Blinks
Pairing
Connection is complete
Cyan
Blinks X3
CAUTION
•
If your Soundbar was playing music when it connects to the SWA-9100S, you may hear some
stuttering from the woofer as the connection finalizes.
4.
Check if the LINK LED is solid blue (connection complete).
STANDBY
LINK
STANDBY
LINK
Blue is On
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Receiver Module.
5.
If the SWA-9100S is not connected, repeat the procedure from Step 2 through 4.
