Samsung HW-Q67CB Full Manual Download Page 46

Page: 46 / 48

ENG - 46

17 SPECIFICATIONS AND GUIDE

Specifications

Model Name

HW-Q67CB

USB

5V/0.5A

Weight

7.7 lbs (3.5 kg)

Dimensions (W x H x D)

40.6 x 2.2 x 4.1 inches

(1030.0 x 57.0 x 105.0 mm)

Operating Temperature Range

+41°F to +95°F (+5°C to +35°C)

Operating Humidity Range

10 % ~ 75 %

AMPLIFIER
Rated Output power

180W (30W x 6)

Supported play formats

Dolby 5.1ch / Dolby Digital Plus / Dolby TRUE HD

/ Dolby ATMOS / DTS Digital Surround /

LPCM 8ch

Subwoofer Name

PS-WR45BB

Weight

8.8 lbs (4.0 kg)

Dimensions (W x H x D)

7.1 x 13.5 x 10.7 inches

(181.5 x 343.0 x 272.0 mm)

AMPLIFIER
Rated Output power

130W

Wireless Surround Speaker SET Name

SWA-9100

Weight
Wireless Receiver Module
Surround Speaker

1.5 lbs (0.7 kg)

1.3 lbs (0.6 kg)

Dimensions (W x H x D)
Wireless Receiver Module
Surround Speaker

2.0 x 7.9 x 5.2 inches (50.0 x 201.3 x 132.0 mm)

3.4x 5.8 x 3.4 inches (87.5 x 147.0 x 87.5 mm)

Operating Temperature Range

+41°F to +95°F (+5°C to +35°C)

Operating Humidity Range

10 % ~ 75 %

Frequency range

20Hz~20kHz

NOTES

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

•

Weight and dimensions are approximate.

Summary of Contents for HW-Q67CB

















































Search results

Summary of Contents for HW-Q67CB

Reviews:

Related manuals for HW-Q67CB

Brands by name

Popular brands

Samsung HW-Q67CB, Full Manual

Search results

Summary of Contents for HW-Q67CB

Reviews:

Related manuals for HW-Q67CB

Brands by name

Popular brands