ENG - 16
04 CONNECTING THE SOUNDBAR
Connecting Electrical Power
Connect the Soundbar to an electrical outlet in the
following order:
1.
Connect the AC/DC adapter to the Soundbar.
2.
Connect the power cord to a wall socket.
•
For more information about the required
electrical power and power consumption,
refer to the label attached to the product.
(Label: Bottom of the Soundbar Main Unit)
NOTES
•
If you unplug and reconnect the power
cord when the product is turned on, the
Soundbar turns on automatically.
•
Never forcibly pull the power cord of AC/
DC adapter.
•
When installing the AC/DC adapter
horizontally, place it with the Samsung
logo facing upward.
•
This product may not operate safely under
-4°F (-20 °C). It is recommended to
connect the power cable to the outlet and
after 1 hour, turn on the Soundbar power .
Rear of the Soundbar Main Unit
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
SERVICE
DC 23V
DIGITAL
AUDIO IN
(OPTICAL)
AC/DC Adapter
•
While the cable is not in use, seal it with
waterproof silicone.
How to mount the AC/DC
adapter
•
Tighten 2 or 4 screws (not supplied) on the
wall or table and then insert them into the
grooves on the rear of the AC/DC adapter.
You cannot install the adapter directly on
the floor.
•
For the mounting screws, see the following
figures.
Recommended Screw specification
(not supplied)
L12
M3
0.26”
(6.5 mm)
0.18”
(4.5 mm)
