ENG - 33
13 TROUBLESHOOTING
Before seeking assistance, check the following.
Soundbar does not turn on.
;
Check whether the power cord of the
Soundbar is correctly inserted into the
outlet.
Soundbar works erratically.
;
After removing the power cord, insert it
again.
;
Power the external device off/on and try
again.
;
If there is no signal, the Soundbar
automatically turns off after a certain
period of time. Turn on the power.
(See page 7.)
If the remote control does not work.
;
Point the remote directly at the Soundbar.
;
Replace the batteries with new ones.
Soundbar does not output any sound.
;
The volume of the Soundbar is too low or
muted. Adjust the volume.
;
When any external device (STB, Bluetooth
device, mobile device, etc.) is connected,
adjust the volume of the external device.
;
For sound output of the TV, select
Soundbar. (Samsung TV: Home (
) →
Menu → Settings ( ) → All Settings (
)
→ Sound → Sound Output → Select
Soundbar)
;
The cable connection to the Soundbar may
be loose. Remove the cable and connect
again.
;
Remove the power cord completely,
reconnect, and turn the power on.
;
Reset the product and try again.
(See page 31.)
Subwoofer does not output any sound.
;
Check whether the LED indicator on the
rear of the Subwoofer is on in blue.
Reconnect the Soundbar and Subwoofer if
the indicator is blinking slowly in blue or
turned red. (See page 17.)
;
You may experience an issue if there is an
obstacle between the Soundbar and
Subwoofer. Move devices to an area away
from obstacles.
;
Other devices sending radio frequency
signals in proximity may interrupt the
connection. Keep your speaker away from
such devices.
;
Remove and reconnect the power plug.
The Subwoofer volume is too low.
;
The original volume of the content you are
playing may be low. Try adjusting the
Subwoofer level. (See page 12.)
;
Bring the Subwoofer speaker closer to you.
Soundbar does not appear on the Bluetooth
device list of the TV.
;
Disconnect the power cord of the Soundbar
completely and reconnect, and then try
searching again. (See page 20.)
;
Connect the TV and Soundbar with an
optical cable, and select the “
D.IN
” mode by
pressing the
(Source)
button on the
top of the Soundbar. See if the audio output
works normally, and try searching again.
(See page 20.)
