background image

ENG - 28

09  CONNECTING A MOBILE DEVICE

Connecting via Bluetooth

When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of 
cabling.

 

The connection is limited to one TV or two Bluetooth devices at the same time.

SOUN

D

MOD

E

PAIR

OR

Bluetooth device

The initial connection

1. 

Press the   

PAIR

 button on the remote control to enter the “

BT PAIRING

” mode.

(OR)

a. 

Press the 

 

(Source) 

button on the top panel and then select “

BT

”. 

BT

” changes to “

BT PAIRING

” in a few seconds automatically or changes to “

BT READY

” if 

there is a connect record.

b. 

When “

BT READY

” appears, press and hold the 

 

(Source) 

button on the top panel of the 

Soundbar for more than 5 seconds to display “

BT PAIRING

”.

2. 

On your device, select “

[AV] Samsung Soundbar B6-Series

” from the list that appears.

 

When the Soundbar is connected to the Bluetooth device, [

Bluetooth Device Name

] → “

BT

” 

appears in the front display.

3. 

Play music files from the device connected via Bluetooth through the Soundbar.

If the device fails to connect

 

If a previously connected Soundbar listing (e.g. “

[AV] Samsung Soundbar B6-Series

”) appears in 

the list, delete it.

 

Then repeat steps 1 and 2.

NOTE

 

• After you have connected the Soundbar to your mobile device the first time, use the “

BT READY

” 

mode to reconnect. 

Summary of Contents for HW-B63M











































Reviews: