background image

ENG - 23

06  USING A WIRELESS CONNECTION TO THE TV 

Connecting a TV via Bluetooth

When a TV is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.

 

Only one TV can be connected at a time.

SOUN

D

MOD

E

PAIR

OR

The initial connection

1. 

Press the   

PAIR

 button on the remote control to enter the “

BT PAIRING

” mode.

(OR)

a. 

Press the 

 

(Source) 

button on the top panel and then select “

BT

”. 

BT

” changes to “

BT PAIRING

” in a few seconds automatically or changes to “

BT READY

” if 

there is a connect record.

b. 

When “

BT READY

” appears, press and hold the 

 

(Source) 

button on the top panel of the 

Soundbar for more than 5 seconds to display “

BT PAIRING

”.

2. 

Select Bluetooth mode on the TV. (For more information, see the TV’s manual.)

3. 

Select “

[AV] Soundbar B6-Series

” from the list on TV’s screen. 

An available Soundbar is indicated with “

Needs pairing

” or “

Paired

” on the TV’s Bluetooth device 

list. To connect the TV to the Soundbar, select the message, and then establish a connection.

 

When the TV is connected, [

TV Name

] → “

BT

” appears on the Soundbar’s front display.

4. 

You can now hear TV sound from the Soundbar.

If the device fails to connect

 

If a previously connected Soundbar listing (e.g. “

[AV] Soundbar B6-Series

”) appears in the list, 

delete it.

 

Then repeat steps 1 through 3.

NOTE

 

• After you have connected the Soundbar to your TV the first time, use the “

BT READY

” mode to 

reconnect.

Summary of Contents for HW-B63M











































Reviews: