Samsung HW-B57C Full Manual Download Page 7

ENG - 7

01  CHECKING THE COMPONENTS

SOUND

MODE

WOOFER

TONE

CONTROL

CH LEVEL

Soundbar Main Unit

Subwoofer

Remote Control (AH81-15439A) / 

Batteries

x 2

Power Cord (Subwoofer, Soundbar) 

(AH81-09821A)

AC/DC Adapter (Soundbar) 

(AH81-09747A)

HDMI Cable  

(AH81-11166A)

x 2

(M4 x L10)

x 2

x 2

Wall Mount Guide 

Holder-Screw 

Screw

Bracket-Wall Mount

(AH81-15440A)

Wireless Surround Speaker SET (SWA-9100)

STANDBY

LINK

x 2

Surround Speaker 

(AH81-15523A (LEFT) / AH81-15524A (RIGHT))

Power Cord  

(AH81-15648A )

x 2

Wireless Receiver Module

Speaker Cable (AH81-11260A)

 

• For more information about the power supply and power consumption, refer to the label attached 

to the product. (Label: Bottom of the Soundbar Main Unit)

 

• To purchase additional components or optional cables, contact a Samsung Service Center or 

Samsung Customer Care.

 

• Depending on the region, the appearance of the AC plug may differ from the plug displayed above, 

or it may be supplied integrated with the AC/DC adapter.

 

• The appearance of the accessories may differ slightly from the illustrations above.

 

• Design and specifications are subject to change without prior notice.

Summary of Contents for HW-B57C














































Reviews: