Samsung HW-B53M Full Manual Download

Page: 40 / 42

ENG - 40

16 SPECIFICATIONS AND GUIDE

Specifications

Model Name

HW-B53M

USB

5V/0.5A

Weight

4.6 lbs (2.1 kg)

Dimensions (W x H x D)

33.9 x 2.3 x 3.0 inches

(860.0 x 59.4 x 75.0 mm)

Operating Temperature Range

+41°F to +95°F (+5°C to +35°C)

Operating Humidity Range

10 % ~ 75 %

AMPLIFIER
Rated Output power

160W(40Wx4)

Supported play formats

(DTS 2.0 and DTS Virtual:X sound are played in

DTS format.)

LPCM 2ch, Dolby Audio™ (supporting Dolby®

Digital), DTS, DTS Virtual:X

Subwoofer Name

PS-WB55D

Weight

9.7 lbs (4.4 kg)

Dimensions (W x H x D)

7.2 x 13.6 x 11.6 inches

(184.0 x 346.0 x 295.0 mm)

AMPLIFIER
Rated Output power

200W

NOTES

• Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.

•

Weight and dimensions are approximate.

Summary of Contents for HW-B53M











































Search results

Summary of Contents for HW-B53M

Reviews:

Related manuals for HW-B53M

Brands by name

Popular brands

Samsung HW-B53M, Full Manual

Search results

Summary of Contents for HW-B53M

Reviews:

Related manuals for HW-B53M

Brands by name

Popular brands