ENG - 18
3.
Select “
[AV] Samsung Soundbar A400-Series
” from the list on TV’s screen.
An available Soundbar is indicated with “
Need Pairing
” or “
Paired
” on the TV’s Bluetooth device
list. To connect the TV to the Soundbar, select the message, and then establish a connection.
•
When the TV is connected ,the blue LED should always go on.
4.
You can now hear TV sound from the Soundbar.
If the device fails to connect
•
If a previously connected Soundbar listing (e.g. “
[AV] Samsung Soundbar A400-Series
”) appears in
the list, delete it.
•
Then repeat steps 1 through 3.
NOTE
• After you have connected the Soundbar to your TV the first time, use the “
Bluetooth Ready
” mode
to reconnect.
Disconnecting the Soundbar from the TV
Press the
(Source)
button at the right side of the Soundbar or the
,
or
button on the
remote control, and then change to any mode except “
Bluetooth
”.
•
Disconnecting takes time because the TV must receive a response from the Soundbar.
(The time required may differ, depending on the TV model.)
•
To cancel the automatic Bluetooth connection between the Soundbar and TV, press and hold
button for 5 seconds in “
Bluetooth Ready
” mode. TV Connect is turned OFF.
•
To turn TV Connect back on, press and hold the
button for 5 seconds with the Soundbar in
“
Bluetooth Ready
” mode.
•
TV Connect is set to ON by default.
Mode
Remote control Button
LED indicator
TV Connect-OFF
5 Sec
B W W
R
Blinking
TV Connect-ON
5 Sec
B W W
G
Blinking
