![background image](http://html1.mh-extra.com/html/samsung/hue-sch-r500/hue-sch-r500_user-manual_3967577128.webp)
128
2.
Use the navigation keys to highlight
Adapt Digits
, then press the
key
.
Your phone displays the first digit sequence and “
Please say
” plays
through the speaker followed by the four digits appearing in the display.
3.
Wait for the beep and say the digits using your normal tone of voice. After a
moment, the phone plays back the recording and prompts “Did the
recording sound ok?”
•
If the recording was good, say “
Yes
.”
•
If you need to re-record, say “
No
.”
If you say “
No
,” the phone prompts you to pronounce the digits again. Wait
for the beep and then say the digits.
Repeat this step until you’re satisfied with the recording.
4.
After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
5.
After six sets of digits, the phone asks whether you want to do more
adaptation. Answer “
Yes
.”
6.
Repeat steps 4 and 5 for another six sets of digits. After the second group
of six sets of digits, “
Adaptation complete
” plays through the speaker
and you are returned to the
Adapt Digits
menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
In standby mode, press the
MENU
key (
), then press
(for
Tools
),
(for
Voice Service
),
(for
Voice Settings
), and
for
Digit
Dialing
. The following options appear in the display:
• Adapt Digits
• Reset Digits
2.
Use the navigation keys to highlight
Reset Digits
, then press the
key.
The phone prompts you to confirm digit adaptation rest.
Press the
OK
(left) soft key (
) to reset your digit adaptation, or press
the
Back
(right) soft key (
) to cancel and retain your digit
adaptation.
3.
Press the
key to save and exit.
pqrs
abc
def