Samsung HT-F4500, Service Manual

Page: 33 / 65

4. Troubleshooting
4.3. Buyer-Region Code Setting Method
4.3.1. Inserting the Region Code after replacing the Main PCB
NOTE
• When replacing the MAIN PCB Ass’y, system micom IC(UIC1) should have proper region code.
• The Set is not working properly if you don’t insert Region code.
• The region code can be inserted by the remote control.
1) Change function mode to "AUX".
2) Press and hold "Tuner Memory" on the remote control for 4-5 seconds.
(2)
(3)
3) The VFD will now say "T-MODE", you must quickly press the "▼" button during T-Mode status.
T -MODE
4) The VFD will now say TEST – – , now insert 46.
TES T − −
5) The VFD will now read – – –. Insert the correct Region code based on the table below.
Ex: For USA Buyers you will type in 0 2 0.
− − −
Copyright© 1995-2012 SAMSUNG. All rights reserved. 4-17