1
English
Connections
English
1
Installing the Speakers on the Tallboy Stand
Turn the Stand Base upside-down and connect it to
the Stand.
Insert small screws (4*20, For connecting Stand & Stand
Base) clockwise into the four holes marked using a
screwdriver as shown in the illustration.
CAUTION :
When you use a torque screwdriver, be
careful not to put excessive force. Otherwise, it runs
idle or can be damaged. (torque screwdriver- below 15
kg.f.cm)
Connect the upper Speaker to the assembled Stand.
Insert another large screw (5*15, For connecting Speaker
& Stand)
clockwise into the hole on the rear of the
speaker using a screwdriver.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1.
2.
!
3.
4.
5.
1
2
3
4
Stand
Stand
Base
Stand
Speaker
5
FRONT
SURROUND
(L) (R)
STAND
STANDBASE
(L) (R)
SCREW (5×15): 4EA
SCREW (4×20): 16EA
SUBWOOFER
Center SPEAKER
FRONT/SURROUND SPEAKER
SUBWOOFER
CENTER
SPEAKERCABLE
Speaker Components
Assembled Speakers
NOTE
Refer to page 17 to install the Speakers on the Tallboy Stand.
✎
`
