English
15
02
Connections
Speaker Components
Assembled Speakers
SCREW (3.5×15): 6EA
FRONT
(L)
(R)
SUBWOOFER
SPEAKER CABLE
STAND BASE
SUBWOOFER
FRONT SPEAKER
Installing the Speakers on the Half Tallboy Stand
Stretch out the speaker cables as shown and arrange
it through the hole of the stand base.
When done, use the screw driver to tighten the screw
(C) in each of 3 screw holes as shown.
This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1.
2.
3.
1
2
3
Adjusting the height of the Half Tallboy Speaker
If you want to adjust the height of the speaker,
loosen 3 screws on the rear of the speaker base
fi rst.
Pull up the speaker in the arrow direction. (See fi gure 2)
CAUTION :
Be careful as an excessive force may
result in a physical damage.
1.
2.
!
1
2
HT-D423H-XU-ENG-1228.indd 15
HT-D423H-XU-ENG-1228.indd 15
2011-12-28 4:17:39
2011-12-28 4:17:39
