Samsung HPS5073X/XAA, Service Manual, Page: 106 / 144

Operation Instruction & Installation
11-6 Samsung Electronics
11-3-4 Fixing the TV panel to the wall attachment panel bracket
1 Remove the screws from the back of the PDP.
2 Use the screw and assemble the plastic hanger. (Please refer to the following picture.)
• Please ask the installers to install the wall mount bracket.
• Please be sure to check if the plastic hanger is completely secured on both the left and
right side after hanging the SET on the wall mount bracket.
• Please avoid catching your fingers while installing and adjusting the angle.
• Please tightly secure the wall mount bracket to the wall to avoid injury from a falling SET.
3 Tighten the screws of the plastic hanger
(shown in picture 2) to the back side of
the PDP. 4 Remove the Safety Pins. Fasten the 4
plastic latches assembled at step ( ) on
the back side of the PDP using the guide
holes of the wall mount, push ( ) and
hook ( ) down to secure the PDP on
the wall mount as illustrated. Secure the
PDP by inserting the Safety Pins, not to
fall from the wall mount.
PDP
Wall Bracket Wall